fbpx
paint, color,house painters
Written by Colleen Kalil

One Brush Is Never Enough

paint, color,house paintersPaint brushes come in a variety of sizes, bristle and handle types. Think all brushes are pretty much the same? Think again. A good brush holds more paint than a cheaper one and will make application easier and faster.

Brush Bristles

There are basically three types of brushes: natural-brushes, polyester brushes, and nylon/polyester brushes. Each brush performs differently depending on the type of paint it’s used with.

Natural-bristle

These brushes are made with animal hair and are best used with oil-based paints, varnishes, and other oil-based finishes. The natural splitting on the tips of these brushes are designed to hold more paint and create a smooth finish.

Polyester bristle

It’s best to use polyester bristle brushes with latex paints, but they hold their shape well when used with any paint and produce a smooth, even finish.

Nylon/polyester blend bristles

The mixture of bristles makes these brushes easy to clean and flexible enough to work with any type of latex paint. Nylon/polyester brushes are durable and keep their shape after continued use. If cared for properly, these brushes can last for years.

Size Does Matter

Choose the brush size depending on what you’ll be painting. A general rule for size is one to two inches for windows and other trim; three inches for gloss paints on doors and cabinets; four inches for large, flat areas. In addition to size, consider the shape of the brush. Slanted brushes create straight lines in corners and on edges, while square edge brushes are good for applying paint on large, flat areas.

Maintenance

Make your brushes last a long time by properly maintaining them after each use. Latex paint cleans up in warm water, while oil paint needs to be cleaned with a solvent. When cleaning a brush after using latex paint, hold the brush under warm running water, spread the bristles, and push them against the bottom of the sink to clean brush from tip to handle. For oil paint, swish the brush from side to side in the solvent to remove paint. Use a fresh container of solvent for the final rinse. Dry brushes flat to maintain the proper shape and never store brushes with the bristle end down.

The technicians at University Painters use the finest equipment to produce quality results all around your home. Call or go online to schedule an appointment today.

house painter, Interior Painters ,Exterior Painters
Written by Colleen Kalil

Painting Concrete or Brick Surfaces

house painter, Interior Painters ,Exterior PaintersPainting is a great way to change the look of any surface, whether it’s inside or outside. Almost anything can be painted, including concrete and brick. With the proper equipment and knowledge, you can add to your home’s value and curb appeal.

Concrete Slabs (such as garage floors)

Before you paint a concrete floor, make sure no moisture comes through the slab. Tape around the floor where it meets the wall and wait for a few days. If there’s moisture on the tape, it’s best not to paint it.

If moisture isn’t a problem, sweep out any dirt and debris and wash the floor with a non-residue cleaner. Remove any old, flaking paint and grease spots. Next, etch the floor’s surface with a muriatic acid solution. Follow the manufacturer’s instructions and make sure you have good ventilation. Do not use it in a closed-in space.

Use a latex primer and paint specially made for concrete. Let the primer dry before applying the paint. Follow the manufacturer’s recommendations for both.

Brick

Before you paint brick, remember it’s a one-time decision. It is nearly impossible to remove paint from brick. Make sure it’s a step you want to take.

The best way to begin any painting project is with a clean surface. Use a wire brush to remove heavy dirt or debris and then wash with a solution of warm, soapy water. If you’re painting an entire house, you might be tempted to get out the power washer. That’s not a good idea; you’re likely to end up with gouges in the brick and you’ll damage the grout. Use a wire brush to spot clean and then use a regular hose to clean the area. You can get a foaming sprayer and then go over the surface again with plain water. Let the brick dry completely.

Use a quality latex primer as a first coat and let it dry completely. Next, apply latex paint for masonry using a long nap roller; use a brush to cover the grout. Don’t be in a hurry. Watch for dripping paint. Two coats are recommended for the best results.

University Painters can help you achieve the look you want for your home’s interior or exterior. Contact us today online at University Painters or call 800-390-4848.